GV56
Part Number: QUECLINK

Description:
The GV56 is a cost-effective GNSS tracker designed for a wide range of basic tracking applications. The model has a 1-wire interface used to support either 1-wire temperature sensor or iButton driver ID. Its built-in Bluetooth can be used for both data and voice transmission.
Frequency:
Quad band GSM/GPRS 850/900/1800/1900 MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 900/850 MHz)
-Class 1 (1W @ 1800/1900 MHz)
GPRS multi-slot class 10
GPRS mobile station class B
RMS Phase Error: 5 deg
Max RF Output Power:
GSM850/900: 33.0±2 dBm
DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range: -15~ -108 dBm
Receiver Sensitivity: Class ⅡRBER 2% (-107 dBm)
Stability of Frequency: < 2.5 ppm
GNSS Specifications
GNSS Type: MTK GNSS receiver
Sensitivity:
Autonomous: -148 dBm
Hot start: -163 dBm
Tracking: -165 dBm
Position Accuracy (CEP): Autonomous: < 2.5m
TTFF (Open Sky):
Cold start: 32s average
Warm start: 30s average
Hot start: 1s average
Interfaces
Digital Input: 1 positive trigger input for ignition detection
Digital Output: 1 digital output, open drain, 150 mA max drive current
Analog Input: 1 analog input (0V-30V)
1-wire Interface: Support 1-wire temperature sensor and iButton driver ID
GSM Antenna: Internal only
GNSS Antenna: Internal only
Bluetooth Antenna: Internal only
LED Indicators: CELL, GNSS
General Specifications
Dimensions: 79.5mm(L) x 44.3mm(W) x 11.9mm(H)
Weight: 55g
Backup Battery: Li-Polymer, 170 mAh
Standby Time:
Without reporting: 45 hours
5 minutes’ reporting: 30 hours
10 minutes’ reporting: 35 hours
Operating Voltage: 8V to 32V DC
Operating Temperature:
-30℃~ +80℃
-40℃ ~ +80℃ for storage
Bluetooth: Support Bluetooth 3.0 (two-way voice communication) & BLE 4.0
Air Interface Protocol
Transmit Protocol: TCP, UDP, SMS
Scheduled Report: Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences: Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions
Power On Report: Report when the device is powered on
Special Alarm: Special alarm based on digital inputs
Remote Control: OTA control of digital outputs
Motion Detection: Motion detection based on internal 3-axis accelerometer
Driving Behavior Monitoring: Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Jamming Detection: Alarm based on jamming detection
Crash Detection: Accident data collection for reconstruction and analysis
Tow Alarm: Alarm for tow event in ignition-off state
Ask for information
For more information, please fill out the below form.