GV300
GV300
GV300
GV300

GV300 

Part Number: QUECLINK
The GV300 series includes two models designed for light duty vehicle applications. The series features multiple interfaces including one RS232 serial port, one smart input, a two-way audio interface, etc. to support a wide variety of external accessorie.

 
  •   Specification:

  •    GSM Specifications

    •   Frequency:                     
                          Quad band:  850/900/1800/1900 MHz

                                  Compliant to GSM phase 2/2+
                                  Class 4 (2W @ 850/900 MHz)
                                   Class 1 (1W @ 1800/1900 MHz)
  •     GPRS:                             
    •               GPRS multi-slot class 12 (10 by default)
                  GPRS mobile station class

  •     UMTS/ HSPA Specifications (GV300W):

    •   Frequency:                         
                           UMTS: 850/1900/2100 MHz
                             UMTS: Class 3 (0.25W@850/1900/2100 MHz)
  •     Data Transmission:
    •                                      HSDPA R5: Max 3.6Mbps (DL)
                                       WCDMA R99: Max 384Kbps (DL)/Max 384Kbps (UL)

  •     GNSS Specifications :  

    •   GNSS Type: u-blox All-In-One GPS receiver
      Sensitivity:                           
                         Autonomous: -147 dBm
                             Hot start: -156 dBm
                       Reacquisition: -160 dBm
                            Tracking: -162 dBm
  •     Position Accuracy(CEP): Autonomous: < 2.5m
    •   TTFF (Open Sky):                           
                                        Cold start: 27s average
                                    Warm start: 27s average
                            Hot start: 1s average

  •     Interfaces:

  •     Digital Inputs:                    
    •                           1 positive trigger input for ignition detection
                              2 negative trigger inputs for normal use
  •     Configurable  Input:         
    •                                      1 special input can be configured as a negative trigger digital
                                                input or an analog input (0V-16V)                                                                     
      Analog Input: 1 analog input (0.3V-16V)    
      Digital Outputs: 2 digital outputs, open drain, 150 mA max drive current
      Latched Digital Output: 1 digital output with internal latch circuit, open drain, 150 mA max drive current                                                   
      Two-way Audio: 2 differential outputs
      Interfaces: 1 single end input
      Cellular Antenna: Internal only
      GNSS Antenna: Internal antenna and optional external antenna
      LED Indicators: CEL, GNSS, PWR
      Mini USB Interface: Used for upgrading and debugging
      Serial Port: 1 RS232 serial port on 16 pin molex type connector, for external devices (GARMIN protocol support)

  •     General Specifications:
    •  

      Dimensions: 80mm(L) x 49mm(W) x 26mm(H)
      Weight : 72 g
      Backup Battery: Li-Polymer, 250 mAh
      Operating Voltage: 8V to 32V DC
      Operation Temperature:
                                              -30℃ ~ +80℃      -40℃ ~ +80℃ for storage  (GV300)
                                          -30℃ ~ +70℃      -40℃ ~ +70℃ for storage  (GV300W)

      Air Interface Protocol:

      Transmit Protocol: TCP, UDP, SMS
      Scheduled Report : Report position and status based on preset time intervals,distance,mileage or a combination of these settings
      Geo-fences: Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
      Low Power Alarm: alarm when backup battery is low
      Power On Report: Report when the device is powered on
      Tow Alarm: Alarm for tow event in ignition-off state
      Antenna Disconnect: Alarm when external GPS antenna is disconnected

      Alarm

      Driving Behavior: Aggressive driving behavior detection, including harsh braking,
      Monitoring: acceleration, etc.
      Crash Detection: Accident data collection for reconstruction and analysis
      Special Alarm: Special alarm based on digital/analog inputs
      Remote Control: OTA control of digital outputs



     
    Ask for information
    For more information, please fill out the below form. 
     _____  __   _____        
|  _  |/  | |  ___|       
| |_| |`| | |___ \ __   __
\____ | | |     \ \\ \ / /
.___/ /_| |_/\__/ / \ V / 
\____/ \___/\____/   \_/
    Please enter characters displayed on the image